Door panels and reinforcing stiffeners shall be 24 gauge cold rolled steel. Door panels will be accurately formed and reinforced with 4" wide stiffeners welded to backs and flanges of panels. Panels shall be hinged in pairs with a minimum of 10" of piano type hinges.
All mounting hardware will be factory installed. Weight bearing pivot rods shall be 5/16" diameter, adjustable screw type, and securely held in position by nylon rod clamp assemblies. Guide rods and upper pivot rods are 1/4" in diameter, spring loaded for easy self-alignment and securely held in position by self-retaining nylon sleeves. Top and bottom tracks shall be of .050 aluminum. Pivot sockets and rubber track bumpers are adjustable to allow lateral alignment and are preset in the track. Doors will be supplied pre-finished. Hardware packages consisting of pulls and screws are supplied with each door.
Mirrors shall be 1/8" (3mm) thick and have pencil ground vertical edges. They will conform to Government Specification DD-M-00411(b) and will be securely mounted with mirror adhesive and double faced polyurethane tape which will also act as a shock absorbing cushion for the glass. Channels shall protect the top and bottom edges of the mirror.
All specifications are based on the latest product information available at time of publication approval. We reserve the right to make changes at any time without notice, in material specifications and styles.
